unisonic technologies co., ltd 2sb824 pnp silicon transistor www.unisonic.com.tw 1 of 5 copyright ? 2012 unisonic technologies co., ltd qw-r208-042.c pnp planar silicon transistor ? features * low collector-to-emitter saturation voltage: v ce(sat) = - 0.4v max/i c = - 3a, i b = - 0.3a sot-89 to-251 1 to-126 1 1 ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 2sb824l-x-ab3-r 2sb824g-x-ab3-r sot-89 b c e tape reel 2sb824l-x-t60-k 2sb824g-x-t60-k to-126 b c e bulk 2SB824L-X-TM3-T 2sb824g-x-tm3-t to-251 b c e tube
2sb824 pnp silicon transistor unisonic technologies co., ltd 2 of 5 www.unisonic.com.tw qw-r208-042.c ? absolute maximum ratings (t a =25 ) parameter symbol ratings unit collector to base voltage v cbo -60 v collector to emitter voltage v ceo -50 v emitter to base voltage v ebo -6 v collector current i c -5 a collector current (pulse) i cp -9 a collector dissipation sot-89 p c 0.5 w to-126/ to-251 1 junction temperature t j +150 storage temperature t stg -40 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (t a =25 ) parameter symbol test conditions min typ max unit collector-to-base breakdown voltage bv cbo i c =-1ma, i e =0 -60 v collector-to-emitter breakdown voltage bv ceo i c =-1ma, r be = -50 v emitter-to-base breakdown voltage bv ebo i c =0, i e =-1ma -6 v collector cut-off current i cbo v cb =-40v, i e =0 -0.1 ma emitter cut-off current i ebo v eb =-4v, i c =0 -0.1 ma dc current gain h fe1 v ce =-2v, i c = - 1a 70 360 h fe2 v ce =-2v, i c =-3a 30 gain bandwidth product f t v ce =-5v, i c =-1a 30 mhz output capacitance c ob v cb =-10v, f=1mhz 100 pf collector-to-emitter sa turation voltage v ce ( sat ) i c =-3a, i b =-0.3a -0.4 v turn-on time t on see specified test circuit 0.1 s storage time t stg see specified test circuit 1.4 s fall time t f see specified test circuit 0.2 s ? classification of h fe1 rank q r s range 70-140 100-200 180-360
2sb824 pnp silicon transistor unisonic technologies co., ltd 3 of 5 www.unisonic.com.tw qw-r208-042.c ? switching time test circuit
2sb824 pnp silicon transistor unisonic technologies co., ltd 4 of 5 www.unisonic.com.tw qw-r208-042.c ? typical characteristics collector current, -i c (a) collector current, -i c (a) 2 5 - 2 0 3 0 0 m a - 2 5 0 m a - 5 0 0 m a - 4 0 0 m a - 3 5 0 m a t a = 8 0 dc current gain, h fe t a = 8 0 collector-emitter sa turation voltage, -v ce (sat) (v) collector-emitter sa turation voltage vs. collector current collector current, -i c (a) 0.1 0.01 10 5 2 0.1 5 3 2 23 5 235 1.0 10 235 2 i c /i b =20 t a = 8 0 25 -20 5 3 2 1.0 3 base-emitter saturation voltage vs. collector current collector current, -i c (a) 0.1 10 5 2 1.0 5 3 2 235 235 1.0 10 235 2 i c /i b =10 3 7 7 i c /i b =20
2sb824 pnp silicon transistor unisonic technologies co., ltd 5 of 5 www.unisonic.com.tw qw-r208-042.c ? typical characteristics(cont.) aso collector-to-emit ter voltage, -v ce (v) 1.0 0.1 10 2 5 1.0 3 2 57 23 5 10 100 23 5 1 m s 2 7 collector current , -i c (a) 3 7 5 77 1 0 m s 1 0 0 m s d c o p e r a t i o n i cp i c (single pulse with regard to 1 ~ 100ms) transition frequency vs. collector current collector current, -i c (a) 0.01 10000 v ce =-5v f=1mhz t c =25 transition frequency, f t (mhz) 3000 1000 300 100 30 10 3 1 0.03 0.1 0.3 1 3 10 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
